Damascus Knives Made and Handcrafted on the East Coast USA.
Our Damascus Knives are a #1 Men's Gift
Attention: You must be 18 years of age or older to purchase our knives. If we cannot verify this using our automated system, you will be asked to provide I.D.Sold and shipped in the USA only | Sorry, Only Domestic Buyers and Shipping Addresses Allowed
|
Handmade Hand-Engraved Damascus Pocket Fish Knife with Genuine Leather Sheath Handcrafted in the USA
Sold out
- Hand-sewn, Handmade Leather Sheath included
- Handle Length: 5 inches
- Blade Length: 4Â inches
- Overall Length: 8.50 inches (open)
- Weight: 7.2 ouncesÂ
- HRC: 56-57 on the Rockwell scale
Our Damascus steel is hand-forged out of steel sheets of grade AISI 1075 and AISI 4340.
AISI 1075Â is a high carbon steel that contains around 0.75% carbon. It is widely used to produce various types of springs and cutting tools.
AISI 4340 is a low carbon and high nickel steel alloy. It contains 1.65% – 2% Nickel, 0.7% - 0.9% Chromium and 0.3% to 0.4% Carbon.
Number of Layers:
Initially a stack of 11 sheets of AISI 1075 & AISI 4340 is formed. The stack is then heated and hammer forged. The heating and beating process is repeated 4 to 5 times to get 176 + layers of high quality Damascus steel.
Heat Treatment:
Each blade is carefully heated to 1560 degree Fahrenheit, where after; it is oil quenched and tempered to achieve hardness above 56 to 57 on the Rockwell scale.
Handmade Stainless Steel Trapper Knife (with Genuine Leather Sheath)
Damascus steel requires more care than stainless steel - which is why we've made a couple versions of beautifully crafted stainless steel. This knifeis a handmade stainless steel trapper knife with a bone handle. This double-blade knife has a trapper blade and a clip point blade that are both sharp and built to last. This knife is a perfect gift for any collector or first time knife owner, as well as an ideal tool to use on a regular basis.Â
 Hand-sewn, Handmade Leather Sheath included
   Â
Specifications
Handle:Â Bone
Blade: D2 Stainless Steel, Clip Point, Trapper Blade
Liner Lock
Handle Length: 4 inches
Blade Length: 3.25 inches
Overall Length: 7.25 inches
Weight: 4.9 oz
Handmade Damascus Corkscrew Knife (with Genuine Leather Sheath) Stunning Horn Handle
Sold out
An elegant, master-crafted Damascus steel corkscrew knife. The blade was hand-forged to perfection with over 180 layers of high quality Damascus steel. This knife is a full-functional piece of knife art that is perfect for collectors and every day knife users. Hand-sewn, Handmade Leather Sheath included
Specifications
Handle:Â Horn
Handle Length:Â 4.75 inches
Blade Length: 3.75 inches
Overall Length:Â 8.5 inches
Weight:Â 3.7 ouncesÂ
HRC: 58-60 on the Rockwell scale
Â
Our Damascus steel is hand-forged out of steel sheets of grade AISI 1075 and AISI 4340.
AISI 1075Â is a high carbon steel that contains around 0.75% carbon. It is widely used to produce various types of springs and cutting tools.
AISI 4340 is a low carbon and high nickel steel alloy. It contains 1.65% – 2% Nickel, 0.7% - 0.9% Chromium and 0.3% to 0.4% Carbon.
Number of Layers:
Initially a stack of 11 sheets of AISI 1075 & AISI 4340 is formed. The stack is then heated and hammer forged. The heating and beating process is repeated 4 to 5 times to get 176 + layers of high quality Damascus steel.
Heat Treatment:
Each blade is carefully heated to 1560 degree Fahrenheit, where after; it is oil quenched and tempered to achieve hardness above 58 to 60 on the Rockwell scale.
Handmade Damascus Pocket Knife with Genuine Leather Sheath Handcrafted in the USA
Sold out
  Â
Specifications:
- Handle: Bone, Stainless Steel Bolster
- Handle Length: 4.5 inches
- Blade Length: 4 inches
- Overall Length: 8.5 inches
- Weight: 5.8 ouncesÂ
- HRC: 55-58 on the Rockwell scale
Our Damascus steel is hand-forged out of steel sheets of grade AISI 1075 and AISI 4340.
​
AISI 1075Â is a high carbon steel that contains around 0.75% carbon. It is widely used to produce various types of springs and cutting tools.
AISI 4340 is a low carbon and high nickel steel alloy. It contains 1.65% – 2% Nickel, 0.7% - 0.9% Chromium and 0.3% to 0.4% Carbon.
Number of Layers:
Initially a stack of 11 sheets of AISI 1075 & AISI 4340 is formed. The stack is then heated and hammer forged. The heating and beating process is repeated 4 to 5 times to get 176 + layers of high quality Damascus steel.
Heat Treatment:
Each blade is carefully heated to 1560 degree Fahrenheit, where after; it is oil quenched and tempered to achieve hardness above 55 to 58 on the Rockwell scale.
Handmade Damascus Fixed Blade Knife with Genuine Leather Sheath Handcrafted in the USA
Sold out
 Â
Specifications
Handle: Rosewood, Brass Lanyard Pipe
Handle Length: 3.25Â inches
Blade Length:Â 2.75 inches
Overall Length: 6Â inches
Weight: 3.1Â ouncesÂ
HRC: 56-57 on the Rockwell scale
Our Damascus steel is hand-forged out of steel sheets of grade AISI 1075 and AISI 4340.
AISI 1075Â is a high carbon steel that contains around 0.75% carbon. It is widely used to produce various types of springs and cutting tools.
AISI 4340 is a low carbon and high nickel steel alloy. It contains 1.65% – 2% Nickel, 0.7% - 0.9% Chromium and 0.3% to 0.4% Carbon.
Number of Layers:
Initially a stack of 11 sheets of AISI 1075 & AISI 4340 is formed. The stack is then heated and hammer forged. The heating and beating process is repeated 4 to 5 times to get 176 + layers of high quality Damascus steel.
Heat Treatment:
Each blade is carefully heated to 1560 degree Fahrenheit, where after; it is oil quenched and tempered to achieve hardness above 56 to 57 on the Rockwell scale.
​
Handmade Damascus Steel Premium Hunting Knife with Genuine Leather Sheath Handcrafted in the USA
Sold out
Â
Specifications:
- Handle:Â Walnut Wood. Stainless Steel Bolster
- Handle Length: 4.25 inches
- Blade Length:Â 4.5 inches
- Overall Length:Â 8.75 inches
- Weight:Â 7.3Â ouncesÂ
- HRC: 56-57 on the Rockwell scale
Our Damascus steel is hand-forged out of steel sheets of grade AISI 1075 and AISI 4340.
AISI 1075Â is a high carbon steel that contains around 0.75% carbon. It is widely used to produce various types of springs and cutting tools.
AISI 4340 is a low carbon and high nickel steel alloy. It contains 1.65% – 2% Nickel, 0.7% - 0.9% Chromium and 0.3% to 0.4% Carbon.
Number of Layers:
Initially a stack of 11 sheets of AISI 1075 & AISI 4340 is formed. The stack is then heated and hammer forged. The heating and beating process is repeated 4 to 5 times to get 176 + layers of high quality Damascus steel.
Heat Treatment:
Each blade is carefully heated to 1560 degree Fahrenheit, where after; it is oil quenched and tempered to achieve hardness above 56 to 57 on the Rockwell scale.
​
Handmade Damascus Steel Folding Knife with Genuine Leather Sheath Handcrafted in the USA
Sold out
Handmade Stainless Steel Pocket Knife with Genuine Leather Sheath Handcrafted in the USA
Sold out
Handmade in the USA Damascus Steel Push Handle Dagger with Handcrafted Genuine Leather Sheath
Sold out
Handmade push dagger with a heavy duty Damascus steel blade and a handsome, comfortable micarta handle.Â
Hand-sewn, Handmade Leather Sheath included . This dagger may be beautiful and collectable, but it's no toy. This is a field dagger, that perhaps a military man or someone who needs something self defense but do not want a firearm. Whatever the reason, this dagger with give you bragging rights, and when used properly under the correct circumstance, it will not fail you. There is nothing ladie like about this dagger, but due to its ease of use, I would recommend this to a Man or Woman. Again, there are very few made and we only have one.
Â
Specifications
Handle: Micarta
Handle Length: 2.5Â inches
Blade Length: 3.25 inches
Overall Length: 5.75 inches
Weight: 3.1Â ouncesÂ
HRC: 58-60 on the Rockwell scale
Â
Our Damascus steel is hand-forged out of steel sheets of grade AISI 1075 and AISI 4340.
AISI 1075Â is a high carbon steel that contains around 0.75% carbon. It is widely used to produce various types of springs and cutting tools.
AISI 4340 is a low carbon and high nickel steel alloy. It contains 1.65% – 2% Nickel, 0.7% - 0.9% Chromium and 0.3% to 0.4% Carbon.
Number of Layers:
Initially a stack of 11 sheets of AISI 1075 & AISI 4340 is formed. The stack is then heated and hammer forged. The heating and beating process is repeated 4 to 5 times to get 176 + layers of high quality Damascus steel.
Heat Treatment:
Each blade is carefully heated to 1560 degree Fahrenheit, where after; it is oil quenched and tempered to achieve hardness above 58 to 60 on the Rockwell scale.
Share this Product
Handmade Damascus Fixed Blade Knife with Genuine Leather Sheath Handcrafted in the USA
Sold out
 Â
Specifications
Handle: Rosewood, Brass Lanyard Pipe
Handle Length: 3.25Â inches
Blade Length:Â 2.75 inches
Overall Length: 6Â inches
Weight: 3.1Â ouncesÂ
HRC: 56-57 on the Rockwell scale
Our Damascus steel is hand-forged out of steel sheets of grade AISI 1075 and AISI 4340.
AISI 1075Â is a high carbon steel that contains around 0.75% carbon. It is widely used to produce various types of springs and cutting tools.
AISI 4340 is a low carbon and high nickel steel alloy. It contains 1.65% – 2% Nickel, 0.7% - 0.9% Chromium and 0.3% to 0.4% Carbon.
Number of Layers:
Initially a stack of 11 sheets of AISI 1075 & AISI 4340 is formed. The stack is then heated and hammer forged. The heating and beating process is repeated 4 to 5 times to get 176 + layers of high quality Damascus steel.
Heat Treatment:
Each blade is carefully heated to 1560 degree Fahrenheit, where after; it is oil quenched and tempered to achieve hardness above 56 to 57 on the Rockwell scale.
​
Handmade Damascus Steel Knife & Stag Horn Handle (with Genuine Leather Sheath)
Sold out
The gorgeous blade is a handmade stag horn fixed blade knife with a heavy duty Damascus steel blade that is razor-sharp and built to last. Â
Hand-sewn, Handmade Leather Sheath includedSpecifications
Handle:Â Stag Horn, Stainless Steel Bolster
Handle Length: 3.5Â inches
Blade Length: 2.5 inches
Overall Length: 6 inches
Weight: 5.4 ouncesÂ
HRC: 58-60 on the Rockwell scale
Â
Our Damascus steel is hand-forged out of steel sheets of grade AISI 1075 and AISI 4340.
AISI 1075Â is a high carbon steel that contains around 0.75% carbon. It is widely used to produce various types of springs and cutting tools.
AISI 4340 is a low carbon and high nickel steel alloy. It contains 1.65% – 2% Nickel, 0.7% - 0.9% Chromium and 0.3% to 0.4% Carbon.
Number of Layers:
Initially a stack of 11 sheets of AISI 1075 & AISI 4340 is formed. The stack is then heated and hammer forged. The heating and beating process is repeated 4 to 5 times to get 176 + layers of high quality Damascus steel.
Heat Treatment:
Each blade is carefully heated to 1560 degree Fahrenheit, where after; it is oil quenched and tempered to achieve hardness above 58 to 60 on the Rockwell scale.
Handmade in the USA Damascus Corkscrew Knife with Genuine Leather Sheath
Sold out
This knife is a masterpiece, hand-crafted with a high quality rosewood handle and a heavy duty Damascus steel blade. This knife is a high-class piece of knife art that is fully functional and built for regular use. With the addition of the corkscrew, you will mesmerize your friends next time you're at dinner and need a corkscrew. Hand-sewn, Handmade Leather Sheath included
 Â
Specifications
Handle:Â Rosewood
Handle Length:Â 4.75 inches
Blade Length: 3.75 inches
Overall Length:Â 8.5 inches
Weight:Â 3.7 ouncesÂ
HRC: 58-60 on the Rockwell scale
Â
Our Damascus steel is hand-forged out of steel sheets of grade AISI 1075 and AISI 4340.
AISI 1075Â is a high carbon steel that contains around 0.75% carbon. It is widely used to produce various types of springs and cutting tools.
AISI 4340 is a low carbon and high nickel steel alloy. It contains 1.65% – 2% Nickel, 0.7% - 0.9% Chromium and 0.3% to 0.4% Carbon.
Number of Layers:
Initially a stack of 11 sheets of AISI 1075 & AISI 4340 is formed. The stack is then heated and hammer forged. The heating and beating process is repeated 4 to 5 times to get 176 + layers of high quality Damascus steel.
Heat Treatment:
Each blade is carefully heated to 1560 degree Fahrenheit, where after; it is oil quenched and tempered to achieve hardness above 58 to 60 on the Rockwell scale.
Gentleman's Corkscrew Damascus Steel Knife with Bottle Opener Leather Sheath Included all Handmade in the USA
Sold out
A gentleman's dream. A razor-sharp Damascus blade with a built in bottle opener, stainless steel corkscrew, and a handsome hand finished olive wood handle with brass bolsters. This knife is a true collector's and heirloom piece that is heavily constructed for everyday use. Hand-sewn, Handmade Leather Sheath included. Gents, this is our favorite of our handmade Damascus steel knives. Just imagine pulling this out to open your beer bottle at a friend gathering; or at a more formal get together, to open the wine. You're acquaintances will drool, so make sure your drink is not too close to anyone. This beautiful pocket knife does not appear threatening, like all our pocket knives in anyway. These are pieces of art, and would also make a great gift for a gentleman or responsible youth.
Specifications
Handle: Olive Wood, Brass Bolsters, Steel Corkscrew & Bottle Opener
Handle Length: 4.5 inches
Blade Length: 3 inches
Overall Length: 8.25 inches
Weight: 5.4 ounces
HRC: 56-57 on the Rockwell scale
Â
Our Damascus steel is hand-forged out of steel sheets of grade AISI 1075 and AISI 4340.
AISI 1075Â is a high carbon steel that contains around 0.75% carbon. It is widely used to produce various types of springs and cutting tools.
AISI 4340 is a low carbon and high nickel steel alloy. It contains 1.65% – 2% Nickel, 0.7% - 0.9% Chromium and 0.3% to 0.4% Carbon.
Number of Layers:
Initially a stack of 11 sheets of AISI 1075 & AISI 4340 is formed. The stack is then heated and hammer forged. The heating and beating process is repeated 4 to 5 times to get 176 + layers of high quality Damascus steel.
Heat Treatment:
Each blade is carefully heated to 1560 degree Fahrenheit, where after; it is oil quenched and tempered to achieve hardness above 56 to 57 on the Rockwell scale.
Handmade Damascus Steel Folding Knife (with Genuine Leather Sheath) Great Colors
Sold out
This is a hand-forged Damascus steel folding knife with a colorful rareolive wood handle. This knife is great for everyday carry and is built strong to last a lifetime. A perfect gift which is beautiful, hand-crafted made in the USA and a discrete size.
Hand-sewn, Handmade Leather Sheath included
Specifications
Handle: Olive Wood
Handle Length:Â 4.75 inches
Blade Length: 3.75 inches
Overall Length:Â 8.5 inches
Weight:Â 3.7 ouncesÂ
HRC: 58-60 on the Rockwell scale
Â
Our Damascus steel is hand-forged out of steel sheets of grade AISI 1075 and AISI 4340.
AISI 1075Â is a high carbon steel that contains around 0.75% carbon. It is widely used to produce various types of springs and cutting tools.
AISI 4340 is a low carbon and high nickel steel alloy. It contains 1.65% – 2% Nickel, 0.7% - 0.9% Chromium and 0.3% to 0.4% Carbon.
Number of Layers:
Initially a stack of 11 sheets of AISI 1075 & AISI 4340 is formed. The stack is then heated and hammer forged. The heating and beating process is repeated 4 to 5 times to get 176 + layers of high quality Damascus steel.
Heat Treatment:
Each blade is carefully heated to 1560 degree Fahrenheit, where after; it is oil quenched and tempered to achieve hardness above 58 to 60 on the Rockwell scale.
Another beautifully handcrafted cutlery, hunting or fishing knife - Fantastic Olive Wood Handle
Sold out
I really love this one. It's one of the most diverse and stunning fixed knives I think we've ever made and there is only one of them. Actually we have two other fixed knives in stock that are just as excellent, but a much more classic look and shape. Use them for fishing, hunting and even in the kitchen. Damascus steel will give you an experience in kives that you never quite had before...unless you already have some.
Specifications
Handle:Â Olive Wood Organically Worked to Produce Color
Handle Length: 4.00 inches
Blade Length: 4.25 inches
Overall Length: 8.25 inches
Weight: 7.3 ouncesÂ
HRC: 58-60 on the Rockwell scale
Â
Our Damascus steel is hand-forged out of steel sheets of grade AISI 1075 and AISI 4340.
AISI 1075Â is a high carbon steel that contains around 0.75% carbon. It is widely used to produce various types of springs and cutting tools.
AISI 4340 is a low carbon and high nickel steel alloy. It contains 1.65% – 2% Nickel, 0.7% - 0.9% Chromium and 0.3% to 0.4% Carbon.
Number of Layers:
Initially a stack of 11 sheets of AISI 1075 & AISI 4340 is formed. The stack is then heated and hammer forged. The heating and beating process is repeated 4 to 5 times to get 176 + layers of high quality Damascus steel.
Heat Treatment:
Each blade is carefully heated to 1560 degree Fahrenheit, where after; it is oil quenched and tempered to achieve hardness above 58 to 60 on the Rockwell scale.
Handmade in the USA Damascus Dagger (with Genuine Leather Sheath) Only a Few Made
Sold out
Stunning hand-crafted, one-of-a-kind Damascus steel dagger. This knife has been heavily constructed with a horn handle and a razor-sharp Damascus steel blade. Hand-sewn, Handmade Leather Sheath included
    Â
Specifications
Handle:Â Horn
Handle Length: 3.75 inches
Blade Length: 3.75 inches
Overall Length: 6Â inches
Weight:Â 9.8 ouncesÂ
HRC: 58-60 on the Rockwell scale
Â
Our Damascus steel is hand-forged out of steel sheets of grade AISI 1075 and AISI 4340.
AISI 1075Â is a high carbon steel that contains around 0.75% carbon. It is widely used to produce various types of springs and cutting tools.
AISI 4340 is a low carbon and high nickel steel alloy. It contains 1.65% – 2% Nickel, 0.7% - 0.9% Chromium and 0.3% to 0.4% Carbon.
Number of Layers:
Initially a stack of 11 sheets of AISI 1075 & AISI 4340 is formed. The stack is then heated and hammer forged. The heating and beating process is repeated 4 to 5 times to get 176 + layers of high quality Damascus steel.
Heat Treatment:
Each blade is carefully heated to 1560 degree Fahrenheit, where after; it is oil quenched and tempered to achieve hardness above 56 to 57 on the Rockwell scale.
Handmade Damascus Mini Pocket Knife (with Genuine Leather Sheath)
Sold out
This small little beauty is a handmade for him or her, mini folding knife that has a razor-sharp Damascus steel blade and a handsome horn and Damascus steel handle. This knife was meticulously hand-crafted to last a lifetime.Â
Hand-sewn, Handmade Leather Sheath included
Specifications
Handle: Horn, Damascus Bolster
Handle Length: 3 inches
Blade Length: 2.25 inches
Overall Length: 5.25Â inches
Weight: 6.8Â ouncesÂ
HRC: 56-57 on the Rockwell scale
Our Damascus steel is hand-forged out of steel sheets of grade AISI 1075 and AISI 4340.
AISI 1075Â is a high carbon steel that contains around 0.75% carbon. It is widely used to produce various types of springs and cutting tools.
AISI 4340 is a low carbon and high nickel steel alloy. It contains 1.65% – 2% Nickel, 0.7% - 0.9% Chromium and 0.3% to 0.4% Carbon.
Number of Layers:
Initially a stack of 11 sheets of AISI 1075 & AISI 4340 is formed. The stack is then heated and hammer forged. The heating and beating process is repeated 4 to 5 times to get 176 + layers of high quality Damascus steel.
Heat Treatment:
Each blade is carefully heated to 1560 degree Fahrenheit, where after; it is oil quenched and tempered to achieve hardness above 56 to 57 on the Rockwell scale.